Welcome to Guangdong Development Electric Co., Ltd., service hotline: +86 13928296188
Oil-immersed power transformers, dry-type power transformers, high and low voltage prefabricated substations.
Class F epoxy resin cast dry-type transformer
At the same medium voltage level and capacity, transformers made of non-metallic alloys can reduce no-load losses by 60%-70%
The iron core of dry-type power transformer adopts high-permeability high-quality grain-oriented cold-rolled silicon steel sheet, 45-degree full oblique step joint, the iron core adopts special square tube pull plate structure, the core column is bound with insulating tape, and the surface of the iron core is coated with special resin to prevent moisture and rust, effectively reducing no-load loss, no-load current and iron core noise.
Keyword:
Class F epoxy resin cast dry-type transformer
Category:
Dry-type power transformer
Product accessories:
Hotline:
The typical amorphous alloy contains 80% iron, and its composition is Minghe, which is a soft magnetic material with small magnetization power and no structural defects that resist wall movement.
Product Introduction
The iron core of dry-type power transformer adopts high-permeability high-quality grain-oriented cold-rolled silicon steel sheet, 45-degree full oblique step joint, the iron core adopts special square tube pull plate structure, the core column is bound with insulating tape, and the surface of the iron core is coated with special resin to prevent moisture and rust, effectively reducing no-load loss, no-load current and iron core noise.
Product Features
1. Low loss, good power saving effect, bringing economic benefits in operation.
2. Flame retardant, explosion-proof, no pollution, maintenance-free, can be installed in the load center, reduce investment cost, save costs.
3. The local discharge capacity is less than 10PC, the coil does not absorb moisture, does not absorb dust, has high mechanical strength and good reliability.
4. Resistance to short circuit, good resistance to lightning impact.
5. The shell is made of stainless steel, cold plate and aluminum alloy. The types are divided into air drawing type and heat dissipation type. The inlet and outlet lines can go up and out, down and out, down and down.
6. The transformer can be used with temperature control and temperature display system according to user needs, and can be used in conjunction with the temperature control system.
Application
Dry-type power transformer is a kind of dry-type transformer with high electrical strength, mechanical strength and heat resistance. It is an excellent product for urban power grid transformation. It is especially suitable for high-rise buildings, airports, power stations, commercial centers and other important places requiring fire prevention, explosion prevention and moisture prevention.
Previous
Class H insulated non-encapsulated dry-type power transformer
immediate consultation
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!
Contact Us
Telephone:+86 135-0995-5413
Mailbox:13928296188@139.com
Address: Workshop 1, 8th Floor, Building 3, 613 Xingtan Shuixiang Avenue, Gaozan Village, Xingtan Town, Shunde District, Foshan City, Guangdong Province
English website:www.gdfzdq.cn